Fast fog for small shops and safes. Easy to install, hard to beat.
Density® 600 Lite is the entry point to the easy-install range — fog protection for premises up to 600 m³, with 200 m³ of dense fog in 28 seconds, an orientable nozzle that fits any installation, and a 2-year warranty.
An alarm tells you it happened. Fog stops it happening.
A typical break-in is over in two to three minutes — long before anyone can respond. Security fog removes the one thing a thief needs: visibility.
Your alarm, a sensor or a panic input fires the unit.
Once armed, the 600 Lite floods the room with dense fog in just 28 seconds.
The intruder can’t see the goods, the exit, or their own hands.
Nothing to grab, nowhere to go. Most intruders abandon within seconds.
of theft attempts at fog-protected sites are stopped. A break-in is usually over in under two minutes — fog closes that gap in seconds, where an alarm only raises it.
Density® manufacturer figure. Non-toxic, residue-light fog.Watch the 600 Lite flood a premises with fog.
Premium fog for small premises, made simple.
Every figure below comes straight from the Density® 600 Lite datasheet.
200 m³ of fog in 28 seconds
Fast and dense — a single shot fills 200 m³ (EN) or up to 600 m³ commercial, covering premises up to 600 m³.
Made for shops, safes and ATMs
The first easy-install model in the range — dedicated to small shops, local safes and ATM protection, with an orientable nozzle for vertical or horizontal mounting.
Low power, over an hour backup
Just 37 W in use. With a 12V/2Ah backup battery, it keeps working for over an hour if mains power is lost.
Safe around stock and food
The fog fluid is authorised for food environments — clean, non-toxic and residue-light, suited to convenience stores, off-licences and stockrooms.
Compact and discreet
Just 7.5 kg at 390 × 300 × 130 mm, available in white or black — small enough to fit discreetly above a counter or safe.
ActiveCloud & APIs, free to use
Optional ActiveCloud board with Wi-Fi and IP, plus Active Server ready. APIs available for custom integration — no subscription required.
Built for small, high-value spaces.
The 600 Lite is designed for premises up to 600 m³. For larger areas, the 900 or HP lines scale up the same protection.
Not sure which model suits your floor area? Tell us your space and we’ll spec it for you.
From trigger to total obscuration in 28 seconds.
Detect
An intrusion is detected by your alarm system, a sensor or a panic input.
Fire
The signal triggers the 600 Lite through one of its two inputs — firing the moment it’s armed and triggered.
Fog
Dense fog floods the protected area — up to 600 m³ commercial per shot (200 m³ EN), with 4 full shots from a single fluid bag.
Alert
With ActiveCloud fitted, you’re notified remotely and can monitor or activate the unit from anywhere.
Not all small-space fog is equal.
Already have an alarm?
The 600 Lite integrates with intruder and hold-up alarm systems through its two cabled inputs and three outputs — adding a powerful physical deterrent on top of detection.
Works alongside your existing setup.
Density® 600 Lite specifications.
Straight from the manufacturer datasheet (v2.9, June 2025). For the installer’s full document, request the PDF.
Heating time is the initial warm-up from cold; in armed standby the unit is ready to fire. ActiveCloud and Active Server boards are optional. 2-year warranty.
Rated 4.9/5 by UK businesses protecting their premises with Density.
“Short, outcome-focused review goes here.”
“One or two sentences. Specific beats generic.”
“Keep it short so all three read at a glance.”
⚑ PLACEHOLDER — replace with real reviews/ratings, or delete this block.
Get a price for your site.
Tell us about the space you want to protect and get an indicative price in minutes — or talk to a UK specialist.
No fixed list price — your quote is specced to your floor area. Get an instant estimate.
Get your instant estimate
Answer a few quick questions about your space and get an indicative price.
Prefer a manual quote? Request a callback · Datasheet (PDF)