Fast, powerful fog for mid-range premises. Zero vision in 10 seconds.
Density 600C Line is the mid-range fog generator for small-to-medium premises and high-value areas. Ruin the thieves' day with dense, zero-vision fog that floods up to 600 m³ and sends intruders out empty-handed, fast.
An alarm tells you it happened. Fog stops it happening.
A typical break-in is over in two to three minutes — long before anyone can respond. Security fog removes the one thing a thief needs: visibility.
Your alarm, a sensor or a panic input fires the unit.
With near-instant deploys, the 600C Line starts flooding the room with zero-vision fog in less than 1 second.
The intruder can’t see the goods, the exit, or their own hands.
Nothing to grab, nowhere to go. Most intruders abandon within seconds.
of theft attempts at fog-protected sites are stopped. A break-in is usually over in under two minutes — fog closes that gap in seconds, where an alarm only raises it.
Watch the 600C Line flood a premises with fog.
Serious fog protection for mid-range premises.
225 m³ of fog in 10 seconds
Fast and dense - a single shot fills up to 225 m³ (EN) in 10 seconds, and 600 m³ in just 28 seconds.
Mid-range power, proven deterrent
Affordable protection for SME businesses, securing high-value areas with real performance - serious fog at a sensible price.
Efficient power, long battery backup
170 W during heat-up, 37 W average after, with a 2.3 Ah 12V backup battery that keeps it working for over an hour if mains power is lost.
Orientable nozzle, flexible fit
The multidirectional nozzle adapts to fit all installation types — wall-mount, ceiling, or corner, with full coverage control.
Compact & discreet
7.5 kg at 300 × 130 × 390 mm, in white — designed for high-value areas where space and discretion matter.
Cloud access, free · API-ready
Add the optional IP Card for remote monitoring and activation at no subscription cost — API protocol available, with full operation and diagnostics via USB or RS232 serial.
Built for mid-range and high-value premises.
The 600C Line is designed for spaces from 5 to 600 m³. For larger floor areas, the HP line scales up the same protection.
Not sure which model suits your floor area? Tell us your space and we’ll spec it for you.
From trigger to zero vision in 10 seconds.
Detect
An intrusion is detected by your alarm system, a sensor or a panic input.
Fire
The signal triggers the 600C Line through one of its four inputs — firing the moment it’s triggered.
Fog
Dense fog floods the protected area, 225 m³ in the first 10 seconds, and 600 m³ in just 28 seconds.
Alert
With the optional IP Card fitted, you’re notified remotely and can monitor or activate the unit from anywhere, via cloud or API.
Not all mid-range fog is equal.
Already have an alarm?
The 600C Line integrates with intruder and hold-up alarm systems through its four galvanically isolated inputs and five relay outputs — adding a physical deterrent on top of detection.
Works alongside your existing setup, with installation provided by your trusted installation company.
Density® 600C Line specifications.
Straight from the manufacturer datasheet. For the installer’s full document, request the PDF.
Datasheet maximum single-shot output: 600 m³ commercial / 200 m³ to EN 50131-8:2019. Maximum shot duration: 28 seconds. Activation begins in under one second; this is not the time to fill the whole zone.
Get a price for your site.
Tell us about the space you want to protect and get an indicative price in minutes — or talk to a UK specialist.
No fixed list price — your quote is specced to your floor area. Get an instant estimate.
Get your instant estimate
Answer a few quick questions about your space and get an indicative price.
Prefer a manual quote? Request a callback · Datasheet (PDF)