Density® 2400 · Security Fog System

Powerful protection for large premises. Leave intruders with nothing.

Density® 2400 is the high-performance fog generator for large business premises and high-risk sites — fast, dense fog that floods up to 2,400 m³ to zero vision and sends intruders out empty-handed.

Covers up to 2,400 m³ 5-year warranty ActiveCloud-ready · free
High-performance protection
Food-environment authorisedSafe around stock & food
5-year warrantyManufacturer-backed
ActiveCloud & Active Server readyFree remote access
Density® GlobalManufactured in Italy by NOREL
Why fog stops theft

An alarm tells you it happened. Fog stops it happening.

A typical break-in is over in two to three minutes — long before anyone can respond. Security fog removes the one thing a thief needs: visibility.

01
Trigger

Your alarm, a sensor or a panic input fires the unit.

02
Dense fog, fast

Once armed, the 2400 floods the room with non-toxic fog the moment it’s triggered.

03
Zero visibility

The intruder can’t see the goods, the exit, or their own hands.

04
They leave empty-handed

Nothing to grab, nowhere to go. Most intruders abandon within seconds.

97%

of theft attempts at fog-protected sites are stopped. A break-in is usually over in under two minutes — fog closes that gap in seconds, where an alarm only raises it.

Density® manufacturer figure. Non-toxic, residue-light fog.
See it in action

Watch the 2400 flood a large premises with fog.

Why the 2400

Serious fog protection for large premises and high-risk sites.

Every figure below comes straight from the Density® 2400 datasheet.

2400 m3 to EN standard of fog in 80 seconds

Fast and dense — a single shot delivers 2400 m3 to EN standard, covering premises from up to 2,400 m³ to zero vision.

High-risk, full deterrent

Powerful protection for large business premises, warehouses and high-risk locations without compromise — the most effective way to add physical deterrence to an alarm.

Mains and battery backup

Around 78 W average after heat-up, with optional backup battery that keeps it working for up to 2 hours if mains power is lost.

Safe around stock

The fog fluid is authorised for food environments — clean, non-toxic and residue-light, suited to large retail, warehouses and commercial sites.

Robust & orientable

14.7 kg steel casing at 477 × 286 × 143 mm, available in white or black — multidirectional nozzle adaptable to all installation types.

ActiveCloud-ready, free

Add the optional ActiveCloud board for remote monitoring and activation at no subscription cost — Active Server ready, with APIs for integration.

Right for your space?

Built for large premises and high-risk sites.

The 2400 is designed for spaces from up to 2,400 m³ to zero vision. For smaller floor areas, the Basic or Lite lines offer scaled-down protection.

Large retail & shopping centresProtect high-value stock across spacious floor areas — proven deterrent for chain stores.
Warehouses & logisticsSecure large distribution centres, stockrooms and storage facilities up to 2,400 m³ to zero vision.
Off-licences & high-risk retailPremium protection for high-value stock, food-environment-safe fog.
Salons & service spacesComprehensive protection for large premises with extensive customer areas.
Large offices & corporateProtect IT, equipment and valuables across spacious office environments.
Jewellery & luxury goodsMaximum deterrent for high-risk, high-value protected spaces.

Not sure which model suits your floor area? Tell us your space and we’ll spec it for you.

How it works

From trigger to total obscuration in seconds.

STEP 01

Detect

An intrusion is detected by your alarm system, a sensor or a panic input.

STEP 02

Fire

The signal triggers the 2400 through one of its four inputs — firing the moment it’s armed and triggered.

STEP 03

Fog

Dense fog floods the protected area — up to 2,400 m³ commercial per shot, and up to 8,000 m³ from a full fluid bag.

STEP 04

Alert

With ActiveCloud fitted, you’re notified remotely and can monitor or activate the unit from anywhere.

The Density difference

Not all high-performance fog is equal.

Food-environment fluidAuthorised for use around food and stock — clean and non-toxic.
ActiveCloud, no subscriptionOptional board adds remote monitoring and activation, free to access.
Real output for large spaces2400 m3 to EN standard in 80 seconds — proven performance for high-risk premises up to 2,400 m³ to zero vision.
API & Active Server readyOpen APIs for software and hardware customisation.

Already have an alarm?

The 2400 integrates with intruder and hold-up alarm systems through its four inputs and five outputs — adding a physical deterrent on top of detection.

Works alongside your existing setup.

Technical detail

Density® 2400 specifications.

Straight from the manufacturer datasheet (v3.1, October 2025). For the installer’s full document, request the PDF.

General
Weight14.7 kg
Dimensions477 × 286 × 143 mm
ColourWhite or black
Power supply230VAC 50Hz or 115VAC 60Hz
Heat-up time from cold49 minutes
Heat-up time after full shoot18 minutes
Operating time without mains2 hours (with optional battery)
Average power consumption after heat-up78 W
Fog generator
Premises size150–300 m²
Max fog, single shot2400 m3 to EN standard
Maximum shooting time80 seconds
Max fog, full fluid bag8,000 m³
Number of full releases on a full fluid bag3
Fluid bag capacity1.5 L
Shooting time programmableYes · programmable in seconds
Adjustable nozzleYes · multidirectional
Steel casingYes
Backup battery12V 2Ah (optional)
Inputs / outputs & communication
Electronic board (CPLUS)4 inputs / 5 outputs
Separate PIR input with 12V supply1
Inputs selectable to be active or passiveYes
Outputs selectable to be Normal Open or Normal ClosedYes
RS232 serial portYes · standard protocol
ActiveCloud (IP / Wi-Fi board)Optional · free access
Active Server boardOptional
Wi-FiOptional antenna
Development APIsAvailable
USB Port for diagnosticYes

Heat-up time is the initial warm-up from cold; in armed standby the unit is ready to fire. ActiveCloud and battery backup are optional. 5-year warranty.

★★★★★

Rated 4.9/5 by UK businesses protecting their premises with Density.

★★★★★
“Short, outcome-focused review goes here.”
Name · Sector · UK
★★★★★
“One or two sentences. Specific beats generic.”
Name · Sector · UK
★★★★★
“Keep it short so all three read at a glance.”
Name · Sector · UK

⚑ PLACEHOLDER — replace with real reviews/ratings, or delete this block.

Get a price for your site.

Tell us about the space you want to protect and get an indicative price in minutes — or talk to a UK specialist.

Free, no-obligation estimate UK-based support & supply Specced to your floor area, not a generic kit

No fixed list price — your quote is specced to your floor area. Get an instant estimate.

Prefer to talk? 0330 133 8990

Get your instant estimate

Answer a few quick questions about your space and get an indicative price.

Prefer a manual quote? Request a callback · Datasheet (PDF)

Common questions

Before you ask us — the basics.

Is the fog safe for people, stock and equipment?
Yes. The fog is non-toxic and the fluid is authorised for food environments, so it suits large retail, warehouses, stockrooms and commercial spaces. It leaves minimal residue and disperses after ventilation.
How big an area can the 2400 protect?
The 2400 is designed for premises from up to 2,400 m³ to zero vision. A single shot emits up to 2400 m3 to EN standard, and a full 1.5 L fluid bag delivers up to 8,000 m³. For smaller areas we’d spec the Basic or Lite lines.
What happens during a power cut?
The 2400 has an optional backup battery (12V 2Ah) that keeps it operating for up to 2 hours if mains power is lost.
Can I monitor it remotely?
With the optional ActiveCloud board fitted, you can monitor and activate the unit remotely through the cloud, with free access to the platform. It’s also Active Server ready, with APIs for integration.
How much does the Density 2400 cost?
There is no fixed list price — the 2400 is specified to match your exact floor area, installation type and location. You can get an instant estimate using our quick quote tool, or talk to a UK specialist who will provide a bespoke quote based on your site.
Can one 2400 protect a large showroom or warehouse zone?
Yes. The 2400 is designed specifically for large premises and high-risk sites, covering floor areas from up to 2,400 m³ to zero vision. It delivers 2400 m3 to EN standard in 80 seconds and up to 2,400 m³ per shot commercially, making it ideal for large showrooms, warehouses, distribution centres and retail spaces where a single unit provides full protection.
How long does it take to heat up?
The 2400 takes about 49 minutes to heat up from cold. After firing a full shot, it reheats in 18 minutes and is ready to fire again.