Density® HP6000 · High-Performance Fog System

6000 m³ to EN standard of fog in 80 seconds. Instant obscuration for large spaces.

Density® HP6000 is the high-performance fog generator for large warehouses, factories, logistics platforms and storage cells — dense, fast-acting fog that covers up to 6,000 m³ to zero vision and deploys intruders in seconds.

Covers up to 6,000 m³ 6000 m³ in 80 seconds ActiveCloud-ready · free
High-performance protection
Industrial-grade performance6000 m³ to EN standard in 80 seconds
2-year warrantyManufacturer-backed
ActiveCloud & Active Server readyFree remote access
Density®Proudly manufactured in Italy
Why fog stops theft

An alarm tells you it happened. Fog stops it happening.

A typical break-in is over in two to three minutes — long before anyone can respond. Security fog removes the one thing a thief needs: visibility.

01
Trigger

Your alarm, a sensor or a panic input fires the unit.

02
Dense fog, fast

Once armed, the HP6000 floods the warehouse or storage cell with dense fog the moment it’s triggered.

03
Zero visibility

The intruder can’t see the goods, the exit, or their own hands — even in large, open spaces.

04
They leave empty-handed

Nothing to grab, nowhere to go. Most intruders abandon within seconds.

97%

of theft attempts at fog-protected sites are stopped. A break-in is usually over in under two minutes — fog closes that gap in seconds, where an alarm only raises it.

Density® manufacturer figure. Non-toxic, residue-light fog.
See it in action

Watch the HP6000 flood a large space with fog.

Why the HP6000

Industrial-scale fog protection for large premises.

6000 m³ of fog in 80 seconds

Fast and dense — a single shot fills 6000 m³ to EN standard, covering volumes of up to 6,000 m³.

Large space, full deterrent

Purpose-built for warehouses, factories, logistics platforms and large storage cells without giving up speed or power — serious performance at industrial scale.

Low power, long runtime

80 W average after heat-up, with optional 12V 7.2Ah battery backup providing 3 hours of operation if mains power is lost.

Sealed storage and handling

4 L fluid bag capacity delivers up to 20,000 m³ total with three full fog releases per charge — built for industrial reliability.

Robust and discreet

50 kg at 435 × 440 × 305 mm, in white or optional black — steel casing and adjustable, anti-vandalism nozzle for field durability.

ActiveCloud-ready, free

Add the optional ActiveCloud board for secure remote monitoring and activation at no subscription cost — Active Server ready, with APIs for integration.

Right for your space?

Built for large premises.

The HP6000 is designed for volumes up to 6,000 m³. For smaller floor areas, the Basic, Lite or 900 lines scale down the same protection.

Large warehousesProtect high-value inventory across volumes of up to 6,000 m³.
Factories & manufacturingIndustrial protection for production floors and storage.
Logistics & distributionFast-acting fog for busy shipping and handling areas.
Storage cells & vaultsSecure high-value asset rooms with fast deployment.
Multi-floor facilitiesProtect critical zones with multi-shot capacity.
Automotive & tech hubsIndustrial-grade security for high-value inventory.

Not sure which model suits your floor area? Tell us your space and we’ll spec it for you.

How it works

From trigger to total obscuration in seconds.

STEP 01

Detect

An intrusion is detected by your alarm system, a sensor or a panic input.

STEP 02

Fire

The signal triggers the HP6000 through one of its four inputs — firing the moment it’s armed and triggered, with programmable timing.

STEP 03

Fog

Dense fog floods the protected area — up to 6000 m³ commercial per shot, and up to 20,000 m³ from a full fluid bag.

STEP 04

Alert

With ActiveCloud fitted, you’re notified remotely and can monitor or activate the unit from anywhere.

The Density difference

Not all industrial fog is equal.

Industrial capacity, low power6000 m³ in 80 seconds at just 80 W average — serious output, efficient running.
ActiveCloud, no subscriptionOptional board adds secure remote monitoring and activation, free to access.
Robust field installationSteel casing, anti-vandalism nozzle, adjustable orientation, tamper-proof design.
API & Active Server readyOpen APIs for software and hardware customisation — built for integration.

Already have an alarm?

The HP6000 integrates with intruder and hold-up alarm systems through its four inputs and four relay outputs — adding a physical deterrent on top of detection.

Works alongside your existing setup.

Technical detail

Density® HP6000 specifications.

Straight from the manufacturer datasheet (v3.1, October 2025). For the installer’s full document, request the PDF.

General
Weight50 kg
Dimensions435 × 440 × 305 mm
ColourWhite (optional black)
CasingSteel
Power supply230 VAC 50 Hz
Heat-up time from cold210 minutes
Heat-up time after full shoot110 minutes
Operating time without mains3 hours (with optional battery)
Power consumption at heat-up600 W
Average power consumption after heat-up80 W
Fog generator
Premises sizeUp to 700 m²
Max fog, single shot6000 m³ to EN standard
Maximum shooting time80 seconds
Max fog, full fluid bag20,000 m³
Shots at max shooting3
Fluid bag capacity4000 ml
Shooting time programmableYes · in seconds
Adjustable nozzleYes · with anti-vandalism function
Low fluid alarmYes
Tamper switch for lidYes
Battery backup12V 7.2 Ah · optional
Inputs / outputs & communication
Galvanically isolated inputs4
Separate PIR input with 12V supply1
Inputs selectable (active/passive)Yes
Relay outputs4
Outputs selectable (NO/NC)Yes
RS232 Serial portYes
ActiveCloud board (IP / Wi-Fi)Optional · free access
Active Server boardOptional
Wi-Fi antennaOptional
USB Port for diagnosticYes
Development APIsAvailable
External LED status indicator connectorYes
Service switch for safe operationYes

Heat-up time is the initial warm-up from cold; in armed standby the unit is ready to fire. ActiveCloud board is optional. 2-year warranty.

★★★★★

Rated 4.9/5 by UK businesses protecting their large premises with Density.

“Short, outcome-focused review goes here.”
Name · Sector · UK
“One or two sentences. Specific beats generic.”
Name · Sector · UK
“Keep it short so all three read at a glance.”
Name · Sector · UK

⚑ PLACEHOLDER — replace with real reviews/ratings, or delete this block.

Get a price for your site.

Tell us about the warehouse or large space you want to protect and get an indicative price in minutes — or talk to a UK specialist.

Free, no-obligation estimate UK-based support & supply Specced to your floor area, not a generic kit

No fixed list price — your quote is specced to your floor area. Get an instant estimate.

Prefer to talk? 0330 133 8990

Get your instant estimate

Answer a few quick questions about your space and get an indicative price.

Prefer a manual quote? Request a callback · Datasheet (PDF)

Common questions

Before you ask us — the basics.

How big an area can the HP6000 protect?
The HP6000 is suggested for volumes up to 6,000 m³. A single shot emits up to 6000 m³ to EN standard, and a full fluid bag delivers up to 20,000 m³. For smaller areas we’d spec the Basic, Lite or 900 lines.
How long does it take to heat up?
Initial heat-up from cold is 210 minutes. After a full shoot, the unit reheats in 110 minutes. In armed standby, the unit is ready to fire immediately.
Will the HP6000 protect a warehouse or distribution centre?
Yes. The HP6000 is purpose-built for large premises, volumes up to 6,000 m³, including warehouses, distribution centres, factories and logistics platforms. Its 6000 m³ to EN standard of fog in 80 seconds provides industrial-scale protection against theft in these high-value environments.
What happens during a power cut?
With the optional 12V 7.2 Ah battery backup installed, the HP6000 continues operating for 3 hours if mains power is lost.
Will it work with my existing alarm?
In most cases, yes. The HP6000 has four galvanically isolated inputs and four relay outputs to integrate with intruder and hold-up alarm systems, plus RS232 serial for connected setups.
How much does the Density HP6000 cost?
Price depends on your floor area, installation requirements and any optional modules (ActiveCloud board, battery backup, etc.). There’s no fixed list price — we spec the system to your space. Get an instant estimate or call us on 01332 000 000 for a personalised quote.
Can I monitor it remotely?
With the optional ActiveCloud board fitted, you can monitor and activate the unit remotely through the cloud, with free access to the platform. It’s also Active Server ready, with APIs for integration.